Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 47
1002-043
Figure 21 Threading LM21 Cable
17. If the viewing direction of LM21 Background Luminance Sensor
needs fine-tuning, it can be adjusted by turning the sensor's
mounting bracket. If the desired LM21 orientation is not possible to
obtain by turning the mounting racket, the FS11P rear panel can be
adjusted by loosening the screws holding the clamps and rotating
the rear panel of the radiation shield. Tighten the screws after the
adjustment.
1001-128
Figure 22 Mounting Interface Unit Enclosure
To Next Page
Loading...
