Vaisala FS11P - Figure 20 Attaching Cable to PWD32

User's Guide _______________________________________________________________________
46 ___________________________________________________________________ M211107EN-C
15. Insert the tightening collar on top of the connector, fix it by three
Allen screws and attach the cable to the PWD32 unit. See Figure
20 below.
1002-042
Figure 20 Attaching Cable to PWD32
16. If the Background Luminance Sensor option is mounted, thread the
LM21 cable through the sensor arm. (Attach the cable tie to the
LM21 cable connector to make threading easier). Attach the cable
to LM21 and mount the LM21 and bracket to the sensor arm. See
the correct location for the cable in Figure 21 on page 47.
NOTE
When connecting LM21, FS11P must be powered off.