Chapter 4 _______________________________________________________________ Installation
VAISALA ______________________________________________________________________ 101
1104-099
Figure 57 Installing LM21 to Mounting Bracket and Attaching
Connector
The following numbers refer to Figure 57 above.
1 = LM21
2 = LM21 fastening screws
3 = mounting bracket
4 = connector of LM21 cable
6. Install the LM21 mounting bracket assembly to the LM21 support
arm using two fastening screws size M5x25 DIN912 (which are
part of the delivery) and the fastener assembly according to Figure
58 on page 102 using a hex socket wrench (size 4).
NOTE
Ensure that the LM21 cable is not pinched during this procedure.
To Next Page
Loading...
