Chapter 6 ______________________________________________________________ Maintenance
VAISALA ______________________________________________________________________ 255
0401-143
Figure 148 Switching Off Receiver Unit/Blower
Heater
The heater can be switched on or off for the transmitter or receiver unit.
Select the command by pressing
B.
The user has to select whether to handle the transmitter or receiver unit.
HEATER (R)ECEIVER/(T)RANSMITTER
The transmitter unit heater is selected by pressing T.
The receiver unit heater is selected by pressing
R.
The user has to select whether the heater shall be switched on or off.
HEATER TRANSMITTER O(N)/OF(F) or
HEATER RECEIVER O(N)/OF(F)
The heater is switched on by pressing N.
The heater is switched off by pressing
F.
The result can be read at the displayed values at Heat.
Beeper
The beeper can be switched on or off for the transmitter or receiver unit.
Select the command by pressing
C.
The user has to select whether to handle the transmitter or receiver unit.
BEEPER (R)ECEIVER/(T)RANSMITTER
To Next Page
Loading...
