Vanderbilt lite blue User Manual

VLBIM06/15/15 v4.1.0
Chapter 8 Schlage Adaptable AD-400 Series 99
WRI400
The WRI400 is a networked access point controller that communicates with lite blue via RF through a mating
Panel Interface Module (PIM400-485-VBB). It is designed to provide wireless connectivity to electronic access
control components including credential readers, door position and request to exit switches.
Performance
 Verification Time - Less than 0.10 second (not including panel delays)
 Communications (Heartbeat) Interval - Configurable in 1 second increments from 1 second to 18 hours.
Heart Beat can be set to 1 second for override operation
 Features - Tamper Switch, Door Status Monitoring, Door Strike Relay, Aux Relay, and 2 Reader Head
operation.
 Inputs - Request-to-Enter, Request-to-Exit, Door Position Switch, Reader Tamper 1, Reader Tamper 2
 Addressing
Card formats
 Accepts card formats up to 255 bits.
Operational environment
 Temperature - -31ºF (-35ºC) to 151ºF (66ºC)
 Humidity - 0 - 100% condensing
Power source
 Power Requirements - 12 VDC or 24 VDC; 500 mA maximum current
Radio Frequency (RF) - The PIM includes an RF Transceiver.
 Optional Dynamic Channel Switching
 900 MHz spread spectrum, direct sequence, 10 channels
 Frequency - 902-928 MHz
 Data Rate - RF: 40 kbps
 Modulo 256 error detection
 Encryption: AES-128 bit keys
 Approvals - FCC and RSS-210 (Canada)
 Transmitter Power - Up to 300mW
 Receiver Sensitivity - 90dBM typical
 Remote antenna modules - The PIM modules are capable of accommodating Remote Antenna Modules.

Vanderbilt lite blue Specifications

General

Brand	Vanderbilt
Model	lite blue
Category	Controller
Language	English