Vanderbilt lite blue User Manual

VLBIM06/15/15 v4.1.0
Chapter 1 lite blue 33
12 Close the browser window. A pop-up window will open.
13 Click on the OK button. The pop-up and the browser window will close.
14 Restore the network settings on the PC (follow step 2 above to access the network settings of the PC).
15 Open a web browser.
16 Enter http:// followed by the new IP address into the browser. The lite blue home page will open and lite
blue's IP address is successfully configured.
DHCP Configuration
Configuring the lite blue controller to DHCP requires the Discovery and Configuration program. This program is
located on the CD that is included with lite blue.
To configure the lite blue controller with the Discovery and Configuration tool:
1 Connect the PC running the Discovery and Configuration tool to the lite blue controller.
 Direct Connection - Using a cross-over cable, the controller can be connected directly to the network
card of the PC.
 Network Connection - Using a regular network cable, the controller can be connected to a hub or switch
that is on the same network as the PC.

Vanderbilt lite blue Specifications

General

Brand	Vanderbilt
Model	lite blue
Category	Controller
Language	English