C H A P T E R 10
VEVMS-VLB
Overview
Integrating a lite blue access control panel with the VEVMS DVR/NVR will provide the ability to view and
search video based on lite blue transactions. After configuring lite blue to communicate with an VEVMS
DVR/NVR, alarms can be shown in Video Control or MultiVideo Remote based on transactions. In addition,
recorded video can be displayed based on transaction searches in the Playback application.
For smaller VEVMS systems, such as a system with only one VEVMS-VBB DVR/NVR installed, it is
recommended to use the Central Security Remote application to manage VEVMS Remote Client users.
Central Security Remote is used in place of the Enterprise Management System (i.e. Video System
Security and the Video Launcher), and is much simpler to setup and configure. See the VEVMS Manual for
details on the full VEVMS system.
Note: The VEVMS-VLB video recorder will only support a maximum of (4) MJPEG IP cameras at any
time. Exceeding the limit of MJPEG IP cameras can cause the system to be unstable. The VEVMS-VLB will
however, support all cameras using MPEG4.
To Next Page
Loading...
Need help?
General
