Vanderbilt lite blue User Manual

96 lite blue Installation Manual
Schlage AD-400 Components
The Schlage AD-400 Series wireless system contains two different types of modules:
 One wireless panel interface module (PIM400)
 One wireless lock (AD-400)
The PIM400 (PIM400-485-VBB) is hard wired to the lite blue communication channels via RS-485 protocol. The
PIM400 installation location is determined by the location of the AD-400 lock with which it will communicate via
radio frequency (RF).
The AD-400 lock is installed at the access point where access will be controlled and/or monitored.
Schlage AD-400 Series Wireless modules
The two components of the AD-400 Series locks, the PIM400 and the AD-400 lock, are detailed in the following
sections.
Panel Interface Module (PIM400-485-VBB)
The PIM400-485-VBB can be integrated with the lite blue system, it works in conjunction with the AD-400 Locks.
The PIM400-485-VBB module is hard wired directly to lite blue communication channels and communicates via
RS-485 protocol. The PIM400-485-VBB can support up to 16 AD-400 locks.
NOTE: When accessing the PIM400-485-VBB with the SUS the device may be labeled as "PIM400-485-SBB"
which does not affect programming of the device and should be ignored.
The PIM400 is capable of configuring, via the Schlage Utility Software (SUS), the following
items:
 Heartbeat interval
 Relock time
 Card format type
 Extended unlock
 Polarity of status signals
 Latch type
 Query intervals and quantity for unlock requests
 Cache mode
 Lock state in case of RF communication loss
 Relock action (timer only, door open or timer or door closed or timer card code conversions)

Vanderbilt lite blue Specifications

General

Brand	Vanderbilt
Model	lite blue
Category	Controller
Language	English