D7x11 Series II Navigator Directional Drill Maintenance 60-3
MAINTENANCE INTERVALS
Initial = Initial maintenance on new machine. Regular maintenance interval may be different.
= Regular maintenance interval.
For Vermeer part numbers, consult your Vermeer dealer.
Service
Maintenance Interval - Service Hours
10 or
Daily
50 or
Weekly 100 200 500 1000 2000
As
Required
Fluid Levels - Check
Air Cleaner and Restriction Indicator - Check
Fuel Tank - Check/Fill
Hydraulic Fluid Level - Check
Bolts - Check/Tighten
Engine Oil and Filter - Change/Replace
Initial
Rack Frame Pivot - Grease
Control Arm Pivot - Grease
Power Vise - Grease
Engine Oil and Filter - Change/Replace
Radiator and Oil Cooler - Clean
Alternator/Fan Belt - Check/Adjust
Hydraulic System - Check
Control Levers - Check
Drilling Fluid System - Check
Drilling Fluid Pump Oil - Change
Initial
Operator Presence System - Check
Neutral Thrust, Rotation and Start - Check
4_00
To Next Page
Loading...
Need help?
General
