D7x11 Series II Navigator Directional Drill Preparation 40-1
Section 40: Preparation
Preparing Personnel
OPERATOR QUALIFICATIONS
Allow only responsible, properly instructed individuals to operate machine.
Become familiar with the controls, operation, and use of the machine under the supervision of a trained and
experienced operator.
The operator must be familiar with the workplace’s safety rules and regulations, and must be mentally and
physically capable of operating the machine safely.
Safety Conscious Operators and Workers
Operators and workers should exercise reasonable accident-prevention measures. This includes properly
locating all underground utilities.
TRAINING
Before operating the machine, the operator and crew should be trained in the operation of horizontal directional
drills. Initial training should be conducted at a site free of underground utilities and should cover:
• all sections of this manual
• processes and procedures used to locate underground utilities
• job site safety, including safety barriers and protective clothing, as well as operating and emergency procedures
• machine lockout procedure and Remote Lockout system
WARNING: Read Operator’s Manual and safety signs before operating machine.
4_00
To Next Page
Loading...
Need help?
General
