D7x11 Series II Navigator Directional Drill Safety Messages 10-1
Section 10: Safety Messages
General safety messages appear in this Safety Messages section. Specific safety messages are located in
appropriate sections of the manual where a potential hazard may occur if the instructions or procedures are not
followed.
A signal word “DANGER”, “WARNING”, or “CAUTION” is used with the safety alert symbol.
Safety signs with signal word “DANGER”, “WARNING”, or “CAUTION” are located near specific hazards.
DANGER Imminent hazards which, if not avoided, will result in serious personal injury or death.
WARNING Potential hazards or unsafe practices which, if not avoided, could result in serious personal
injury or death.
CAUTION Potential hazards or unsafe practices which, if not avoided, could result in minor personal
injury or product or property damage.
SAFETY SYMBOL EXPLANATION
This is the safety alert symbol. This symbol is used in combination with an exclamation mark or
other symbols to alert you to the potential for bodily injury or death.
WARNING: Read Operator’s Manual and safety signs before operating machine.
To Next Page
Loading...
Need help?
General
