30-28 Overview D7x11 Series II Navigator Directional Drill
Auto Greaser (Option)
The machine may be equipped with an auto greaser
(1) for lubricating drill rod threads. Press Auto
Grease Button (2) on right joystick to release grease.
To increase or decrease amount of grease discharged
by auto greaser, loosen adjustment nut (3), and
rotate threaded rod (4) IN to decrease grease
amount, or OUT to increase grease amount.
Refill or replace auto grease cartridge as needed.
Refer to the Maintenance Manual for procedures.
1
3
4
2
To Next Page
Loading...
Need help?
General
