D7x11 Series II Navigator Directional Drill
Revision History
Revision Date Page(s) Description
o1_00 07/04 All Operator’s Manual released.
o1_01 09/04
TOC; Intended Use; Controls, pp. 21-2–21-5, 21-12, 21-16,
21-18; Overview, pp. 30-1–30-15, 30-19, 30-26, 30-27, 30-
31, 30-32; Preparation, pp. 40-5–40-8, 40-12, 40-13;
Operation, pp. 50-4, 50-5, 50-7, 50-15, 50-29; Index.
Safety, control, and Remote Lockout system updates;
addition of “Intended Use” section; miscellaneous
changes.
o2_00 07/05
ii, 11-1, 21-1, 40-9, 40-10, 40-11, 40-12, 50-5, 50-6, 50-7,
50-12, 50-14, 55-3
Welding precautions, new Strike Alert system,
positive jumper terminal.
o3_00 04/06 All
Third edition Operator’s Manual released. New: PFC
pump; radiator with integrated oil cooler; fittings and
hosing. Hydraulic oil filter and RLO holster moved.
New decals for right joystick and welding warning,
New engine compartment shields and breather.
o3_01 04/06 20-5, 30-3, 30-4, 30-5, 30-6, 30-8, 50-4
Revised Remote Lockout information and new
storage location for transmitter.
o4_00 12/07
Introduction, iv, 11-1, 20-1, 20-2, 20-8, 20-10, 20-11, 20-14,
20-15, 30-2, 30-4, 30-5, 30-9, 30-29, 30-31, Section 40, 50-
4, 50-36, 55-2, 60-3
Removed E-stop and red safety bar, beginning with
S/N 769; added rod cradle, beginning with S/N 712; ;
corrected information; jumper terminal removed;
updated photos
o4_01 09/08 Warranty Warranty updated.
To Next Page
Loading...
Need help?
General
