iVent201 Operator's Manual
115
7. Now the bottom of the slider is
highlighted bright blue.
Turning the control knob will
adjust the alarm for the LOWER
percentage limit. Note that
adjusting the lower limit higher
than the currently-selected
higher limit will move the
higher limit up. Once you’ve
selected the desired lower limit,
press the control knob. The
numbers in red to the right of
the slider will now indicated the
new values you’ve selected.
8. Now, with the FiO
2
slider
highlighted in relief, you may
either press the control knob to
change the FiO
2
settings again,
or turn the control knob to
select another alarm setting to
adjust, or select Accept at the
bottom right of the Alarm
Settings window to accept all
the alarm settings and return to
the Main Screen.
To Next Page
