Waters 600e - Setting Detector Setup Parameters

80 Setting PowerLine Controller Operating Parameters
Figure 4-19 Detector Setup Screen (with 431/432 Detector Parameters)
In addition to the parameters shown on the screen, the Detector Setup screen displays the
screen keys described in Table 4-4.
Table 4-4 Detector Setup Screen Keys
4.6.2 Setting Detector Setup Parameters
This section describes the detector setup parameters and the procedures for setting them.
The Detector Setup screen includes the following parameter selections:
For UV/Vis detectors:
• Data channel
• Filter
• Autozero
•Polarity
Key Function
Next Setup Displays the Pump Setup screen.
Help Displays the Help screen for the Detector Setup screen.