SuperRack SoundGrid / User Guide
Scope Parameters
Functions can be assigned to the scope of any snapshot:
The contents of the Hot Plugins Panel can be changed per snapshot. If Hot Plugins is selected, then
when this snapshot loads, it will also read what plugins should be in the HPP and will load them
accordingly. If the button is off, then the snapshot won’t update the contents of the HPP.
Windows Recalls which windows were open and how they were located on the screen when the snapshot was
stored. This allows you to create a specific workspace for a snapshot.
Dugan Speech settings. Current Dugan settings will be within the scope of the snapshot.
Sets rack processing to In (enabled) or Out (bypassed)
Plugins
These switches set whether a snapshot can change the parameters of any plugin in a specific plugin rack
slot number, regardless of the plugin. When, for example, “Plugin 7” is deselected, all plugins in slot 7 in any
rack are in recall safe mode when a snapshot is recalled.
Racks sets which racks are included in the scope of the snapshot. Scope parameters (e.g., Hot Plugins, Dugan, Mute)
apply only to highlighted racks, so a rack that is not highlighted will not change with a snapshot recall, regardless of the
Function settings. The number of racks in the Scope section reflects the current SuperRack configuration.
All/None Select: Resets the Scope selection to “all parameters/channels are within the scope of this snapshot” or “no
parameters/channels are within the scope of this snapshot.”