Waves SuperRack SoundGrid User Manual

SuperRack SoundGrid / User Guide
142
Console Mirroring:
Two DiGiCo consoles can be mirrored to provide full redundancy. In the event of a console or SuperRack failure,
control and processing will pass to the redundant DiGiCo/SuperRack system. Switching between main and
redundant consoles or engines is automatic and is handled by the console. The SuperRack associated with the
redundant console will replace the original SuperRack.
Console mirroring requires two complete DiGiCo /SuperRack SoundGrid networks, each with the same, most current
software versions.
SETTING UP MIRRORING
The Mirroring Control Option control panel shows compatible consoles that are available to this console.
Select the LAN port that this host
computer is using to connect to
the SoundGrid network. A list of
the SoundGrid applications that
can be mirrored to this console is
shown on the left.
Select the desired console from
the list.
Click Establish to start mirroring.

Waves SuperRack SoundGrid Specifications

General

Brand	Waves
Model	SuperRack SoundGrid
Category	Recording Equipment
Language	English