SuperRack SoundGrid / User Guide
SERVER ASSIGNMENT MENU: OTHER FUNCTIONS
The Server Assignment menu, in addition to assigning
servers to a SuperRack, is used to set the server
network buffer, select colors for easier identification of
servers, provide information about the server, and
unassign the server from this SuperRack.
Menu Item/Indicator Possibilities Function
Opens a list of all servers located on the LAN: User-friendly
name; Server type: model and revision (CPU generation).
Click on a server name to assign it. Unavailable servers are
grayed out.
40-96 samples
Default: 40 samples (0.8
ms)
Range @ 88.2–96 kHz:
80-192 samples.
Default: 80 samples (0.8
ms)
Sets the amount of time it takes for audio to stream from the
I/O or driver to the server and back. This determines the
speed of real-time processing. Lower settings result in lower
system latency and greater responsiveness. Higher settings
yield more stability but greater latency.
If you encounter pops or similar errors, increase the buffer
setting. The buffer size is set in samples but is also displayed
in milliseconds.
To Next Page
Loading...
Need help?
General
