SuperRack SoundGrid / User Guide
Assigning Controllers
The Controllers slots at the bottom of the System Inventory page are used to assign up to five control devices. These
devices can be used to control SuperRack functions.
Click on a controller slot to open the drop-down menu and
select a controller protocol. All installed controller drivers appear in the list, whether the device is present or not.
Controller device status is displayed on the device icon.
N/A: Device corresponding to selected protocol is not present or not functioning properly.
On: Device is present and operational.
Once a controller is selected and functioning properly, click on the Gear button to open its control panel.
To Next Page
Loading...
