SuperRack SoundGrid / User Guide
MEMORY (MEM)
Shows memory use on the host computer as a percentage of the memory set aside by the OS.
AUTO-CONFIG
A SuperRack system can be configured manually or with the aid of this auto-configure tool. Auto-Configure
surveys the network for available I/O devices and assigns them to SuperRack. Auto-Configure requires that the
correct LAN port is selected. If you forget to select the port, or if you chose incorrectly, you will be prompted to
select the correct port.
CLEAR ALL
Removes all assigned I/O devices, servers, and drivers.
To Next Page
Loading...
