SuperRack SoundGrid / User Guide
ASSIGNING RACK OUTPUTS
Rack outputs are assigned in the same manner as rack inputs. A single rack output can patch to several device I/Os.
Open the Output Device drop-down
menu.
Select an output format. Choosing an
output format that is incompatible with
the input will change the input to a
format compatible with the new output
format setting.
Select a device. The I/O channel that is
currently patched to this rack is shown
at the top of the menu. Click on this
name to open the control panel for this
device.
Select the output device I/O channels. If
you select device channels that are
already patched to another rack, you will
be prompted to change the routing or
cancel the rerouting.
Set the channel format (e.g., L-C-R-S, L-
CL-C-CR-LS-RS-LFE, etc.) if applicable.
Repeat this procedure for all I/O channels. Rack input and
output do not need to be the same format, but they must be
compatible. Many plugins do not have components for all rack
formats, so test plugin compatibility before committing to a
rack format.
To Next Page
Loading...
