1. Programming
1 File – to open or save configuration files
2 Project – to open or save project files (same as configuration file)
3 Display – opens the coffee machine statistics or service history
4 Configuration – same as the buttons „Load“ and „Send“
5 Extra – in order to define beverage names (chapter 3.2)
6 Load – in order to upload the coffee machine configuration to the PC
7 Send – in order to send the PC configuration data to the working memory of the cof-
fee machine
8 Gear – in order to send the PC configuration data to the working memory and the fac-
tory setting memory
9 Set – in order to send the PC configuration data to the factory setting memory
10 Sys – to open the system configuration window
11 Level 1 products – Tab for beverage settings of level 1
12 Mono key level 2 – Tab for beverage settings of level 2
13 P1 – P10 – Beverage keys to open the beverage settings of the respective beverage
To Next Page
