2. System Configuration – „Sys“ – upper window
1. RTC – downloads the system time and date from PC to coffee machine
2. Brew water temp. – shows the brewing water temperature which is currently set in
the basic settings, value can be modified.
3. Overtemperature rest phase – if the coffee machine is not in use, it is heated up in
continuous intervals to the set value through the brewing water temperature, value
must not be modified.
4. Fixtemp. beverage dispensing – Heating up to this value during beverage dispensing,
value must not be modified
5. Hot water temp. – During hot water dispensing machine is heated up to this value,
value must not be modified.
6. Steam boiler temp. – Standard temperature for the steam boiler, this value must not
be modified.
7. Language – Shows the currently set language, value can be modified.
8. Coffee machine number – Serial number of the coffee machine must be entered here.
This is shown in the system information, must not be modified.
9. % Coffee aroma mild – the coffee strength is reduced by the set value this value
must not be modified.
10. % Coffee aroma strong – the coffee strength is increased by the set value this value
must not be modified.
11. Tab coffee machine options – The different options can be selected here.
To Next Page
Loading...
