5 Programming - System Configuration 32
5.4 Beverage-, and coffee machine configuration – save, reset & upload
The coffee machine CPU of the consumer coffee machines has two separate memories
Working memory – there you will find all data and settings to which the machine currently has access. This working memory corresponds to the custom-
er memory already known from other WMF coffee machines. If the customer carries out modifications in the beverage or basic settings, these modifica-
tions are only done in the working memory.
Factory setting memory – serves as data back-up and resetting and corresponds to the service memory already known from other WMF coffee machines.
In this memory the last saved factory setting is saved.
5.4.1 Saving of coffee machine data
5.4.1.1 Saving in the working memory
In the working memory, all setting parameters relevant for the coffee machine as well as customer settings are saved.
The coffee machine exclusively works with the data and settings saved in the working memory!
If settings (basic settings, beverage settings etc.) are directly carried out at the coffee machine, they immediately overwrite the settings in the
working memory.
If settings are carried out through the laptop service program, they are only written into the working memory of the coffee machine after having
pushed the „Send“key.
By pushing the „Send“key the modified settings are transferred to the
coffee machine.
To Next Page
Loading...
