12. Milk system steam running time – indicates the time how long after a milk system
rinsing a steam jet is dispensed, value must not be modified.
13. Piston cleaning phase 1 – indicates the volume of the 1
st
piston cleaning, value must
not be modified
14. Piston cleaning phase 2 – indicates the volume of the 2
nd
piston cleaning, value must
not be modified
15. Piston cleaning phase 3 – indicates the volume of the 3
rd
piston cleaning, value must
not be modified
16. Waiting in the cleaning phase – waiting phase between the rinsing intervals, value
must not be modified
6. System configuration – „Sys“ – Descaling
1. Forced descaling – activates or deactivates forced cleaning, if forced cleaning is activat-
ed the descaling has to be carried out after the descaling prompt and the offset prompt,
otherwise the machine will not be ready to operate, value must not be modified.
2. Carry out cleaning after descaling – activates or deactivates forced cleaning after de-
scaling, value must not be modified.
3. Descaling prompt / litres – Litres until coffee machine descaling is demanded, the en-
tered value corresponds to the set water hardness degree and the water filter option.
4. Prompt offset forced descaling / litres –Litres after descaling prompt until forced de-
scaling is activated, value must not be modified.
5. Set descaling cycle 3x (ml) – indicates volume of the single descaling rinsing cycles,
value must not be modified
6. Descaling rinsing water – rinsing water volume after the 3 descaling cycles, value must
To Next Page
Loading...
