WMF 800 - Button Programmierung > Load > Sys > Filter; Energy

9 Button Programming > Programming 49
not be modified.
7. Descaling / rinse hot water valve – rinsing water volume through hot water outlet af-
ter the 3 descaling cycles and the descaling rinsing have been finished, value must not be
modified.
8. Waiting in the descaling phase – waiting between the descaling cycles, value must not
be modified
9.2.4 Button Programmierung > Load > Sys > Filter / Energy
7. System Konfiguration – „Sys“ – Filter / Energy
1. Water filter inserted – indicates whether a water filter is activated or deactivated, val-
ue must only be modified at the coffee machine.
2. Water filter – activates or deactivates the option water filter and offers the selection
whether a 100 litres or 200 litres filter (office function) is used, value can be modified
according to the filter in use.
3. Water filter change / litres – Litres until prompt for filter change is displayed; the en-
tered value refers to the set water hardness degree and the water filter option.
4. Water filter change / days – Days until prompt for filter exchange is displayed, the en-
tered value is fixed, value must not be modified.
5. Water filter changing enforcement / litres – Litres after prompt for filter change is
displayed until forced filter change is activated, value must not be modified.
6. Water quantity filter rinsing – rinsing volume during filter rinsing through hot water