WMF 800 - Hot Water Dispensing; 2;5.2.1 Dosing Procedure Hot Water T2-39

Dispensing devices and dispensing of beverages
© WMF800 / 900 / 1000S / 1000proS Edition 07/2014 - KMT
T2-39
2/5.2 Hot water dispensing
The hot water spout is always present, because it is need for descaling in addition to
dispensing hot water for tea beverages. The hot water spout must be neither closed
off nor taken off.
WMF800 / 900 WMF1000S / 1000proS
Error without display message
• No hot water dispensed, even though the pump is running
• Water leaks out (hot water spout is leaky)
Spare parts
• Hose coupling
2/5.2.1 Dosing procedure hot water
When the hot water dispensing is started, the pump and the heating is switched on.
The dispensing can be stopped by pressing the hot water button again.
When the hot water button is held down, water is dispensed in free flow.
Welcome