9 Button Programming > Programming 53
10. Milk beverages enabled – activates or deactivates dispensing of milk beverages in the
office function, value should only be modified at the coffee machine.
11. Pause at coffee pot dispensing – this value indicates how long the waiting time be-
tween the single brewing single cycles is during pot dispensing, value must not be modi-
fied
9.3 Button Programming > Load > Level 1 products
1. System Configuration – „Product level 1“ – P1 – P6
1. Level 1 products– in this tab the beverage buttons of the 1
st
level are indicated
2. Mono key / level 2 – in this tab the beverage buttons of the 2
nd
level are indicated
3. P1 – P10 – Through these buttons the beverage settings for each beverage can be called
up
To Next Page
Loading...
