5 Programming - System Configuration 33
5.4.1.2 Saving into the factory setting memory
The factory setting memory only serves for data back-up and to reset the factory settings.
In the factory setting memory the last date save by the technician is saved, i.e. as long as no modifications have been carried out compared to the status
of new machines as delivered, the factory data is saved.
If settings (basic settings, beverage settings etc.) are carried out directly at the machine, they are NOT written in the factory setting memory.
If settings are carried out through the laptop service program, they can ONLY be uploaded into the factory setting memory with the service pro-
gram.
Modifications by the service program are written into the factory setting memory ONLY AFTER having pushed the „Set“ or „Gear“ key.
Pushing the „Set“key ONLY writes the modifications into the factory setting memory!
Pushing the „Gear“key writes the modifications into the factory setting memory and ADDITIONALLY into the working memory.
Important advice:
The consumer coffee machines DO NOT– as known from the usual WMF coffee machines – have an unchangeable factory setting memory.
Consequently, if the existing factory setting memory is overwritten by pushing the „Set“ or „Gear“ key, the saved basic factory data originating from the produc-
tion will be irrevocably lost!
By pushing the „Set“key modifications are only written into the factory setting
memory. The working memory remains unchanged.
By pushing the „Gear“key the modifications are written into the factory
setting memory and in the working memory.
To Next Page
Loading...
