Service
T5-4
© WMF800 / 900 / 1000S / 1000proS Edition 07/2014 - KMT
5/2.3.3 Customer Check-up Procedure
- Brüheinheit / brewing unit
1
Pflegekit
Care - kit
Ausgabe Nr. /Release No.: 01
µ
O-Ring Set / Set of O-rings
- Elastomerdampfdüse /
Elastomer steam nozzle
4
2x
- Brüheranschlüsse /
brewing unit connections
2
1.
- Wassertank / water tank
3
Sicherungsring entfernen /
remove snap-ring
Unteren Brühkolben kräftig nach oben schieben /
pull strongly lower brewing piston up
Beide roten O-Ringe austauschen /
replace both red O-rings
2x
Beide O-Ringe austauschen /
replace both O-rings
O-Ring austauschen /
replace O-ring
Elastomerdampfdüse
austauschen /
replace elastomer steam nozzle
- All-in-One Auslauf komplett /
All-in-one spout complete
6
All-in-one Auslauf austauschen /
Replace All-in-one spout
- Milchschlauch komplett /
Milk hose complete
7
Milchschlauch austauschen /
replace milk hose
- Fett / Grease
5
Alle O-Ringe leicht einfetten /
grease slightly all O-rings
2.
3.