inoLab
®
Multi 9620 IDS Safety
ba77173e04 12/2017 11
Only the operation and running of
the meter according to the instructions and technical specifications given
in this operating manual is authorized (see section 16 T
ECHNICAL DATA, page
132).
Any other use is considered unauthorized.
2.2.2 Requirements for safe operation
Note the following points for safe operation:
• The meter may only be operated according to the authorized use specified
above.
• The meter may only be supplied with power by the energy sources
mentioned in this operating manual.
• The meter may only be operated under the environmental conditions
mentioned in this operating manual.
• The meter may not be opened.
2.2.3 Unauthorized use
The meter must not be put into operation if:
• it is visibly damaged (e.g. after being transported)
• it was stored under adverse conditions for a lengthy period of time (storing
conditions, see section 16 T
ECHNICAL DATA, page 132).
To Next Page
Loading...
Need help?
General
