wtw inoLab Multi 9620 IDS User Manual

inoLab
®
Multi 9620 IDS Settings
ba77173e04 12/2017 107
11.7.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
11.7.3 Automatic Stability control
The automatic Stability control (AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic Stability control function (see
section 11.7 S
ENSOR-INDEPENDENT SETTINGS, page 105).
The measured parameter flashes on the display
 as soon as the measured value is outside the stability range
 when you switch over between the measured parameters with <M>.
 when the automatic Stability control is switched off.
Detailed information on the memory functions of the Multi 9620 IDS
are given in section 12 D
ATA STORAGE, page 112.

wtw inoLab Multi 9620 IDS Specifications

General

Brand	wtw
Model	inoLab Multi 9620 IDS
Category	Measuring Instruments
Language	English