wtw inoLab Multi 9620 IDS - 11.8.2 Resetting the system settings

inoLab
®
Multi 9620 IDS Settings
ba77173e04 12/2017 111
11.8.2 Resetting the system settings
The following system settings can be reset to the default status:
The resetting of the system settings is done in the menu Storage & config /
System / Reset. To open the menu Storage & config in the measured value
display, press the <ENTER_> key.
Setting Default settings
Language English
Audio signal on
Baud rate 4800 Baud
Output format ASCII
Decimal separator Dot (xx.x)
Brightness 10
Temperature unit °C
Stability control on