wtw inoLab Multi 9620 IDS - 12.3.2 Erasing the measurement data storage; 12.3.3 Measurement dataset

Data storage inoLab
®
Multi 9620 IDS
116 ba77173e04 12/2017
Display presentation
of a dataset
Sample printout
Quitting the display To quit the display of stored measurement datasets, you have the following
options:
 Switch directly to the measured value display with <M>.
 Quit the display and move to the next higher menu level with <ESC>.
12.3.2 Erasing the measurement data storage
How to erase the measured value storage is described in section 12.3.1
E
DITING THE MEASUREMENT DATA STORAGE, page 115.
12.3.3 Measurement dataset
A complete dataset consists of:
 Date/time
 Meter name, serial number
 Sensor name, serial number
 ID number
Manual data storage 3 of 64
01.09.2017 11:24:16 ID number: 1
SenTix 940 B092500013
pH 7.000 24.8 °C AR Sensor:
+++
01.09.2017 08:00
01.09.2017 09:56:20
inoLab Multi 9620 IDS
Ser. no. 09250023
SenTix 940
Ser. no. B092500013
ID number 2
pH 6.012 24.8 °C, AR, Sensor: +++
________________________________________
01.09.2017 10:56:20
inoLab Multi 9620 IDS
Ser. no. 09250013
SenTix 940
Ser. no. B092500013
ID number 2
pH 6.012 24.8 °C, AR, Sensor: +++
________________________________________
etc...