inoLab
®
Multi 9620 IDS Operation
ba77173e04 12/2017 23
Messages
Information is marked by the [
i
] symbol. It cannot be selected. Example:
4.5.4 Navigation example 1:Setting the language
1. Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
2. Open the Storage & config menu with <ENTER_>.
The instrument is in the setting mode.
Calibration record
Calibration data storage
Buffer: TEC
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[
i
] 2.00 4.01 7.00 10.01
pH
01.09.2017 08:00
System
Data storage
Storage & config
01.09.2017 08:00
To Next Page
Loading...
