wtw inoLab Multi 9620 IDS - Page 22

Operation inoLab
®
Multi 9620 IDS
22 ba77173e04 12/2017
The selection is done with the <><> keys. The current selection is dis-
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with <ENTER>. Example:
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <ENTER>. Subsequently,
the setting can be changed with <><> and <ENTER>. Example:
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>. Example: Display the Calibration
record function.
General
Interface
Clock function
Service information
Reset
System
01.09.2017 08:00
Language: Deutsch
Audio signal: on
Brightness: 12
Temperature unit: °C
Stability control
: on
General
01.09.2017 08:00
pH
01.09.2017 08:00
Calibration record
Calibration data storage
Buffer: TEC
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[
i ] 2.00 4.01 7.00 10.01