wtw inoLab Multi 9620 IDS User Manual

inoLab
®
Multi 9620 IDS What to do if...
ba77173e04 12/2017 131
Data transmission to
USB printer does not
work
Error message,
Memory error 1
Time gets lost
Cause Remedy
– The USB-B interface is connected to
a PC
– Connected USB printer was not rec-
ognized
– Disconnect the PC from the
USB-B interface
– Use suitable USB printer (see
section 13.2 T
RANSMITTING DATA
TO A USB PRINTER, page 118)
– Check the printer settings (see
section 13.2 T
RANSMITTING DATA
TO A USB PRINTER, page 118)
Cause Remedy
– Instrument storage was not found – Please contact the service.
Cause Remedy
– Buffer battery is empty – Change the buffer battery (see
section 14.1.1 G
ENERAL MAINTE-
NANCE ACTIVITIES, page 123)

wtw inoLab Multi 9620 IDS Specifications

General

Brand	wtw
Model	inoLab Multi 9620 IDS
Category	Measuring Instruments
Language	English