inoLab
®
Multi 9620 IDS Settings
ba77173e04 12/2017 99
Man. temperature -25 ... +25 ... +130 °C Entry of the manually deter-
mined temperature. For mea-
surements without
temperature sensor only.
Alternative tempera-
ture
on
off
Takes over the temperature
value from an IDS sensor.
This menu item is only avail-
able if an IDS adapter and an
IDS sensor with integrated
temperature sensor are con-
nected.
ISE setup/
AutoRead criterion
low
medium
high
Selection of the AutoRead
criteria (see section 7.1.1
M
EASURING THE ION CONCEN-
TRATION, page 47).
ISE setup/
Ion type
Ag, Br, Ca, Cd, Cl,
CN, Cu, F, I, K, Na,
NO3, Pb, S, NH3,
NH4, CO2, ION
Selection of the ion type to be
measured.
An ion that is not included in
the list can be measured with
the setting, ION.
* Measuring with the NH 500 electrode:
The NH4 setting is not suitable for the gas-sensitive
electrode NH 500.
Select the following settings:
Ion type "ION", Valency "-1".
ISE setup/
Unit
mg/l
µmol/l
mg/kg
ppm
%
Selection, with which unit the
measurement result and cali-
bration standards should be
displayed.
ISE setup/
Valency
-8 ... +8 Set the valence (Valency)
and molar weight (Molar
mass) for the ion
(only for ISE setup/Ion type =
ION)
ISE setup/
Molar mass
1 ... 300 g/mol
ISE setup/
Density
0.001 ... 9.999 g/ml or
kg/l
Adjustable density of the test
sample (only with Unit: mg/
kg, ppm, %)
Method Standard addition
Standard subtraction
Sample addition
Sample subtraction
Blank value addition
Selection of the available
measuring methods.
Start method Start measurement with the
selected method.
Menu item Possible setting Explanation
To Next Page
Loading...
Need help?
General
