Xerox Color 800 - Page 128

Recommended solutionPossible causeFault code
Power Off/On the machine.
If the error persists, consult
your trained Xerox Productivity
Plus (XPP) representative; this
person is also known as the
Technical Key Operator (TKO).
If error persists, contact the
Customer Support Center.
Presser Role Finger fault010 409
Power Off/On the machine.
If the error persists, consult
your trained Xerox Productivity
Plus (XPP) representative; this
person is also known as the
Technical Key Operator (TKO).
If error persists, contact the
Customer Support Center.
Trim Transfer Belt limit fault010 410
Power Off/On the machine.
If the error persists, consult
your trained Xerox Productivity
Plus (XPP) representative; this
person is also known as the
Technical Key Operator (TKO).
If error persists, contact the
Customer Support Center.
V-Tray Belt Exit fault010 411
Power Off/On the machine.
If the error persists, consult
your trained Xerox Productivity
Plus (XPP) representative; this
person is also known as the
Technical Key Operator (TKO).
If error persists, contact the
Customer Support Center.
Upper Cooling Belt fault010 412
Power Off/On the machine.
If the error persists, consult
your trained Xerox Productivity
Plus (XPP) representative; this
person is also known as the
Technical Key Operator (TKO).
If error persists, contact the
Customer Support Center.
Roll Assembly fault010 413
Xerox
®
Color 800/1000 Press
10-26
User Guide
Problem solving
(continued)