Repair Analysis Procedures
Phaser® 3500 Laser Printer Service Manual
2-9
L Motor
Ready
This tests if the laser unit is
ready and capable of
printing, or at a stable
polygon motor speed.
Laser Ready Test
Pass/Fail
Fuser Fuser
Te mp.
When the Target Temp is
displayed, INput the
temperature you would like
to set with the arrow buttons.
Press the OK button.
The target temperature and
the real temperature will be
displayed on the bottom line.
Default is T:190
Note: You can adjust the
temperature value while in
diagnostics, however, once
you exit the temperature will
return to the default.
Target/Current
T: 190, C: XX
Read OPC
Cycle
The total rotating number of
the OPC drum is displayed
on the bottom line of the
control panel display when
the process is on.
Total OPC-Cycle
XXXX
Main Menu Sub Menu Description/Function Control Panel Display
To Next Page
Loading...
