Repairs and Adjustments
Phaser® 3500 Laser Printer Service Manual
4-29
Tray 2 Pick-Up Assembly and Rollers
Note: It is not necessary to remove the entire assembly in order to
remove the Pick Rollers.
1. Remove:
■ Covers on page 4-4
■ Left Cover on page 4-5
■ Top Cover on page 4-8
■ Tray 1 (MPT) Assembly on page 4-12
■ Inner Cover on page 4-16
■ Main Drive Assembly and Registration (Feed) Clutch on page 4-24
■ Tray 2 and Tray 3 (if installed)
2. Release the latch on the pick-up cam and slide off the right side of the shaft.
1
2
Gear-Pick Up Cam
s3500-124
To Next Page
Loading...
