Xerox Phaser 3500 Service Manual

Repairs and Adjustments
Phaser® 3500 Laser Printer Service Manual
4-30
3. Remove the e-clip from the feed shaft.
4. Remove the locking bearing, rotating in the direction of the arrow as shown below.
5. Remove the gear by sliding off the shaft.
6. Turn the printer onto its left side.
7. Remove the front crossbar secured by 2 screws.
Bearing
Feed2
Gear
s3500-125
Bottom Cross Bar
s3500-127

Xerox Phaser 3500 Specifications

General

Brand	Xerox
Model	Phaser 3500
Category	Printer
Language	English