Repairs and Adjustments
Phaser® 3500 Laser Printer Service Manual
4-26
Tray 1 Pick-Up Assembly and Pick
Rollers
Tray 1 Pick Roller Only
Note: If you are only removing the Pick Roller, and not the shaft, it may be necessary to
rotate the shaft, release the solenoid, and then rotate the shaft gear clockwise to position
the roller properly.
Caution: Do not break the pick shaft by trying to force the pick roller off.
1. Slide the idle gears outward. Release the locking tab on the pick roll assembly and slide
the roller to the right.
Idle
Pick Roller
1
2
1
s3500-123
To Next Page
Loading...
