08/2012
6-15
WorkCentre 5021/5019
6.1.17, 6.1.18
General Procedures
Initial Issue
6.1.17 Classifications and Functions
6.1.17.1 Classifications and Functions
This section describes the relationship between paper type selection and paper feeding.
The Paper Type Settings for the Main Unit Tray and Option Trays can be set at the Key Opera-
tor Tools Mode (KO) or the CE Mode.
The Paper Type Settings for the MSI can also be set in the same way as for the Main Unit
Trays at the KO Mode or the CE Mode.
O: Possible, X: Not Possible
6.1.17.2 Classifications and Paper Types
This is not specified as there is no classification.
6.1.18 Auto 2 Sided Printing
The paper sizes and weights that can be used for 2 sided print are as follows.
1. Paper Size (Standard Sizes only. Non-Standard Sizes are not supported.)
• Min: B5 SEF
Min: A5 SEF, 5.5 X 8.5’ SEF (MSI)
• Max: A3 SEF, 11x17’ SEF
2. Paper Weight
• 60 gsm~110gsm*
*: 91 gsm to 110 gsm is for MSI only
Table 1
Tray
UI
Classificati
on
IOT Paper
Type Data
Weight
gsm
Function
Paper Size
Automati
c 2 Sided
Print
Output
Standard
Size
Non-
Standard
Size Exit1
Tray 1 Plain Normal Paper 64-90 O X O O
Lightweight Thin Paper 60-63 O X O O
STM Plain Normal Paper 64-90 O X O O
Lightweight Thin Paper 60-63 O X O O
MSI Plain Normal Paper 64-90 O X O O
Heavy-
weight
Thick Paper 1 91-110 O X O O
Lightweight Thin Paper 60-63 O X O O
To Next Page
Loading...
Need help?
General
