08/2012
6-22
WorkCentre 5021/5019
6.1.28, 6.1.29
Initial Issue
General Procedures
6.1.27 Document Feeder (DADF) 6.1.28 Count-up for Print/Copy jobs
• This section describes the count-up specification for jobs (Printer, Copy)
The purpose of the count-up meter is to manage the number of sheets of the print output
by print jobs and copy jobs. The count-up meter of WC5021/5019 is not guaranteed as a
meter to charge.
The device UI can display 'Copy','Print' and 'Total' counters.
Table 1
Item Description
Type of Document Feeder Duplex Auto Document Feeder
Originals Size/Type Max: A3, 11x17’
(Min: A5
38 to 128 g/m2 (2 Sided: 50 to 128 g/m2)
Document capacity 110 sheets
Document replacement
speed
(A4 LEF 1 Sided Copy)
WC 5019 : 18 sheets/min
WC 5021 : 20 sheets/min
Size/Weight Width: 540 mm or shorter x Depth: 492 or shorter x Height: 95
mm or shorter
6.3 kg or lighter (TBD) (Counter Balance included)
To Next Page
Loading...
