Xerox WorkCentre 5021 - Page 324

08/2012
6-55
WorkCentre 5021/5019
6.3.10
General Procedures
Initial Issue
6.3.10 NVM Fusing
Table 1 NVM Fusing
Chain-Link NVM Name
Setting
Range
(Minimum
Value)
Setting
Range
(Maximum
Value) Default Value
Write
Yes/No
Initialization
Yes/No Description
744-040 Fusing_U42_HISTORY 0 3 0 Enable Enable The Overheat Temp Fail has occurred.
744-056 Fusing_U41_HISTORY 0 4 0 Enable Enable Types of Fusing On Time Fail occurence:
0: Has not occurred1: U4-1 Control 12: U4-1 Control 23: U4-1 Con-
trol 34: U4-1 Control 4