Xerox WorkCentre 5021 Service Documentation

08/2012
6-54
WorkCentre 5021/5019
6.3.9
Initial Issue
General Procedures
742-044 PH_ROS_LASER_SIDE_REGI_ADJUSTMENT_
MSI
-50 50 0 Enable Enable ROS Write Position (MSI)
(0.169 mm increments)
742-045 PH_ROS_LASER_SIDE_REGI_ADJUSTMENT_
DUP_ALL_TRAY
-50 50 0 Enable Enable ROS Write Position (Dup-All)
(0.169 mm increments)
742-046 PH_ROS_LASER_SIDE_REGI_ADJUSTMENT_
DUP_TRAY1
-50 50 0 Enable Enable ROS Write Position (Dup-Tray 1)
(0.169 mm increments)
742-047 PH_ROS_LASER_SIDE_REGI_ADJUSTMENT_
DUP_TRAY2
-50 50 0 Enable Enable ROS Write Position (Dup-Tray 2)
(0.169 mm increments)
742-048 PH_ROS_LASER_SIDE_REGI_ADJUSTMENT_
DUP_MSI
-50 50 0 Enable Enable ROS Write Position (Dup-MSI)
(0.169 mm increments)
Table 1 NVM PH
Chain-Link NVM Name
Setting
Range
(Minimum
Value)
Setting
Range
(Maximum
Value)
Default
Value
Write
Yes/No
Initialization
Yes/No Description

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi