Xerox WorkCentre 5021 - Page 330

08/2012
6-61
WorkCentre 5021/5019
6.3.13
General Procedures
Initial Issue
6.3.13 NVM ROS
Table 1 NVM ROS
Chain-Link NVM Name
Setting
Range
(Minimum
Value)
Setting
Range
(Maximum
Value)
Default
Value
Write
Yes/No
Initialization
Yes/No Description
749-001 ROS_MOTOR_AUTO_STOP_TIME 1 30 10 Enable Enable The timeout time during priority start up.
This may shorten the lifespan of the ROS.
(Unit: 1 s)
749-002 ROS_MOTOR_JOB_END_AUTO_STOP_TIME 1 10 1 Enable Enable ROS Motor Stop Delay
This may shorten the lifespan of the ROS.
(Unit: 1 s)