Xerox WorkCentre 5021 - Page 329

08/2012
6-60
WorkCentre 5021/5019
6.3.12
Initial Issue
General Procedures
750-054 XERO_DRUM_NEAR_CYCLE_DATA 0 65535 0 Enable Enable Cycle Count When Near Occurs
(Unit: 100 cycle)
750-055 XERO_DRUM_NEAR_PV_DATA 0 65535 0 Enable Enable PV When Near Occurs
(Unit: 100 sheet)
750-056 XERO_DRUM_NEAR_TICK_DATA 0 5000 0 Enable Enable Remaining Film Thickness When Near Occurs
(Unit: 0.01 Micrometer)
750-057 XERO_DRUM_LIFE_END_CYCLE_DATA 0 65535 0 Enable Enable Cycle Count When Life End Occurs
(Unit: 100 cycle)
750-058 XERO_DRUM_LIFE_END_PV_DATA 0 65535 0 Enable Enable PV When Life End Occurs
(Unit: 100 sheet)
750-059 XERO_DRUM_LIFE_END_TICK_DATA 0 5000 0 Enable Enable Remaining Film Thickness When Life End Occurs
(Unit: 0.01 Micrometer)
Table 1 NVM XERO
Chain-Link NVM Name
Setting
Range
(Minimum
Value)
Setting
Range
(Maximum
Value)
Default
Value
Write
Yes/No
Initialization
Yes/No Description