Xerox WorkCentre 5021 Service Documentation

08/2012
6-65
WorkCentre 5021/5019
6.3.14
General Procedures
Initial Issue
752-406 PRC_EMPTY_CHECK_START_ATC_MOD_TARG
ET
0 999 0 Enable Enable The ATC Correction Target Value at the start of
empty detection
752-414 PRC_CORR_BUFFER_EMPTY_CHECK_CNT -30000 30000 0 Enable Enable Correction Buffer empty detection count
752-440 PRC_1_TO_2_PV_CNT_PRE 0 4294967295 0 Enable Enable 1 to 2 PV count_previous
752-441 PRC_1_TO_2_PV_CNT 0 4294967295 0 Enable Enable 1 to 2 PV count
752-473 PRC_TONER_REST 0 100 100 Enable Enable Remaining Toner %
752-482 PRC_RECOVERY_CNT 0 255 0 Enable Enable Recovery count
752-527 PRC_DISP_MOTOR_FAIL_FLAG 0 1 0 Enable Enable DispenseFailFlag
0: Has not occurred
1: Yes
752-535 PRC_SEAL_DETECT_FLAG 0 1 0 Enable Enable Seal Not Pulled Off Detection Flag
752-538 PRC_DELTA_ATC_TARGET_SETUP_CORR -128 127 0 Enable Enable Delta ATC Target Setup Correction Amount
752-556 PRC_REAL_TEMP -50 110 0 Enable Enable The actual temperature
752-557 PRC_RECOERY_RETRY_CNT 0 255 0 Enable Enable Recovery retry count
752-750 PRC_DELTA_VH_PR2 -1000 1000 0 Enable Enable Delta VHpr2
752-765 PRC_DELTA_VB_PR -255 255 0 Enable Enable Delta VBpr
752-766 PRC_DELTA_VB -255 255 0 Enable Enable Delta VB
Table 1 NVM PROCON
Chain-Link NVM Name
Setting
Range
(Minimum
Value)
Setting
Range
(Maximum
Value)
Default
Value
Write
Yes/No
Initialization
Yes/No Description

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi